MAG Box Setup

[Ariel]

1. Power On and Connect Your MAG Device

• Connect your MAG device to your TV using an HDMI cable.
• Power on the device and connect it to the internet via Ethernet or Wi-Fi.

2. Access the MAG Device Settings

• Once the device is powered on and connected, you’ll see the main screen.
• Using your remote, navigate to Settings.

3. Set Up the Portal

• In the Settings menu, select System Settings.
• Then, go to Servers and choose Portals.

4. Configure the Portal

• In the Portals menu, you’ll find two fields: Portal 1 name and Portal 1 URL.
  • Portal 1 name: Enter a name for the portal (e.g., "My IPTV").
  • Portal 1 URL: Enter the server URL provided by your IPTV service provider (e.g., http://yourprovider.com:8080/c).
• If your provider has given you a specific Xtream Codes URL, you can use that here.

5. Save the Configuration

• After entering the details, press the OK or Save button on your remote to save the configuration.

6. Reboot Your MAG Device

• Once the portal is configured and saved, go back to the main menu.
• Reboot your MAG device by unplugging it from the power source and then plugging it back in.

7. Login with Xtream Codes

• After rebooting, your MAG device should automatically load the IPTV portal you just configured.
• When prompted, enter your Xtream Codes username and password provided by your IPTV provider.
• The MAG device will authenticate and load the IPTV channels.

8. Start Watching

• Once authenticated, you’ll see the list of available channels, VODs (Video on Demand), and other IPTV content.
• Use your remote to browse and select the content you wish to watch.

9. Troubleshooting (if needed)

• If channels don’t load or you encounter issues:
  • Double-check the portal URL and ensure it’s correctly entered.
  • Verify your Xtream Codes username and password.
  • Ensure your internet connection is stable.
  • Try rebooting the device again.